STID Architect - Standard - OSDP - Mifare - Display

NOTE.
Requires NOX R9 for active display. The reader will work on NOX R8, but only with keyboard function on the display.

Display readers have clear advantages, but depending on the environment and intended use, also disadvantages. We recommend talking to ARAS before purchasing.

STid Architect card reader with touchscreen display.

Module concept allows you to add additional new functions: keyboard, touchscreen or biometric fingerprint sensor.

Patented accelerometer-based tamper technology.

NFC Technology for smartphones.

• Operating frequency / standards: 13.56 MHz. ISO14443 types A & B, ISO18092
• Chip compatibility: MIFARE® Ultralight® & Ultralight® C, MIFARE® Classic & Classic EV1, MIFARE Plus® (S/X) & Plus® EV1, MIFARE® DESFire® 256, EV1 & EV2, CPS3, NFC (HCE), PicoPass ® (CSN only), iCLASS ™ (CSN* only)
• Communication and protocols: TTL Data Clock (ISO2) or Wiegand (encrypted mode - S31) / RS232 / RS485 (encrypted mode - S33) with secure communication protocols SSCP & SSCP2; OSDP™ V1 (regular communication) & V2 (SCP secure communication)
• Touchscreen: Color touchscreen - 2.8" - 240 x 320 pixels
• Touchscreen keypad: 12 backlit keys - Standard or Scramble pad mode
• Touchscreen keypad functions: Card AND key / Card OR key
• Touchscreen setup: Enabled / disabled with card and UHF technology in R3x / S3x - By software configuration in W3x
• Reading distance: Up to 6 cm with a MIFARE® Classic card, Up to 4 cm with a MIFARE Plus® / DESFire® EV1 card
• Read / Write: Read only - also available as read/write (ask ARAS)
• Light indicator: 2 RGB LEDs - 360 colors, configuration with RFID card, software, external command (0V) according to the interface
• Audio indicator: Internal buzzer with adjustable intensity, Configuration with RFID card, software, external command (0V) according to interface
• Current requirement / power supply: 130 mA / 12 VDC Max / 7 VDC to 28 VDC
• Connection: 10-pin plug-in connector (5 mm) / 2-pin plug-in connector (5 mm): O/C contact - Tamper detection signal
• Material: ABS-PC UL-V0 (black)
• Dimensions (h x w x d): 128 x 80 x 31 mm
• Operating temperatures: -20 ° C to + 70 ° C / Humidity: 0-95%
• Tamper: Accelerometer-based tamper detection system with key deletion option (patented solution) and / or message to the controller
• Protection / durability: IP65 excl. connector
• Mounting: Compatible with all surfaces and metal walls without spacer - Wall mounting / Recessed: - European 58 & 60 mm
• Certifications: CE, FCC & UL

Mobile ID:

• Badge mode
• Slide mode
• Tap tap mode
• Hands-free mode
• Remote mode
  
  

Mounting height:
Display readers require a higher mounting height to make functional sense. ARAS recommends a height of at least 160 cm, or the use of angled mounting accessories.