VR40 - Display reader with keyboard - OSDP - Mifare

NOTE.
Requires NOX R9 for display function.
The reader will work on NOX R8, but with the display turned off.

Display readers have clear advantages, but depending on the environment and intended use, also disadvantages. We recommend talking to ARAS before purchasing.

OSDP card reader with keyboard and OLED display.

Reads Mifare Classic, Plus and DESfire EV1

With 3 LED indicators, and a multi-tone buzzer.

A multi-colored light frame provides easy-to-read access status information (configurable).

Backlit keyboard with tactile feedback.

Graphic OLED display maximizes user interaction with various arming and access messages.

The display brightness is automatically adjusted by a built-in light sensor.

NOTE.

This reader is specially configured for the NOX system

Technical data:

• System compatibility: NOX systems
• Interface to Controller: RS485 OSDP
• Card technology: Mifare Classic, Mifare Plus and Mifare DESFire EV1.
• Reading distance: Up to 6 cm.
• Graphic monochrome OLED display
• Indicators: 3x LED (red / yellow / green), 1x multitone buzzer
• Multi-colored light frame
• Backlit keypad
• For both indoor and outdoor use.
• IP55 (surface mounted)
• Material: Zinc die-cast metal with polycarbonate plastic front.
• Color: Black, matt chrome.
• Dimensions (W x H x D): 85 x 114 x 22 mm. (surface mounted)
• Weight: 500 g.
• Tamper protection: Yes.
• Operating voltage: 8.5 to 30.0 VDC.
• Operating temperature: -40 ° C to + 55 ° C (surface mounted)
• Power consumption: DC 12V 60mA Peak 220mA.

The reader is supplied as a standard reader.
The reader can be modified and configured completely according to the end user's wishes, but an additional price for modifications, configuration and installation of special software must be expected if one does not wish to use it with the standard configuration.

Mounting height:
Display readers require a higher mounting height to make functional sense. ARAS recommends a height of at least 160 cm.